| Basic Specifications |
UBBPg2 |
UBBPg2a |
| Basic Specifications |
| Version |
SRAN18.1 |
SRAN18.1 |
| Model |
WD2DUBBPG200 – UBBPg2 |
WD2DUBBPG2A0 – UBBPg2a |
| BBU |
BBU3910, BBU5900, BBU5900A |
BBU3910, BBU5900, BBU5900A |
| RAT |
UMTS /LTE FDD /LTE NB-IoT /LTE TDD /NR FDD /UL co-BBP /UM co-BBP /LM co-BBP /LT co-BBP /TM co-BBP /ULM co-BBP /LTM co-BBP /LN (FDD) co-BBP /LMN (FDD) co-BBP |
UMTS /LTE FDD /LTE TDD /LTE NB-IoT /NR TDD /NR FDD /UL co-BBP /UM co-BBP /LM co-BBP /LT co-BBP /TM co-BBP /ULM co-BBP /LTM co-BBP /LN (FDD) co-BBP /LMN (FDD) co-BBP /TN (FDD) co-BBP /TN (TDD) co-BBP /LN (TDD) co-BBP /LMN (TDD) co-BBP |
| CPRI Port Quantity |
6 |
6 |
| CPRI Protocol Type |
CPRI |
CPRI/eCPRI |
| NR(FDD) |
| Number of Cells Specifications 1 |
12×5/10/15/20 MHz 1T1R/2T2R/2T4R/4T4R |
12×5/10/15/20 MHz 1T1R/2T2R/2T4R/4T4R |
| Number of Cells Specifications 2 |
6×25/30/40 MHz 1T1R/2T2R/2T4R/4T4R |
6×25/30/40 MHz 1T1R/2T2R/2T4R/4T4R |
| Number of Cells Specifications 3 |
6×5/10/15/20 MHz 8T8R |
6×5/10/15/20 MHz 8T8R |
| Number of Cells Specifications 4 |
3×25/30/40 MHz 8T8R |
3×25/30/40 MHz 8T8R |
| Number of Cells Specifications 5 |
3×25/30/40 MHz 1T1R/2T2R/2T4R/4T4R + 6×5/10/15/20 MHz 1T1R/2T2R/2T4R/4T4R |
3×25/30/40 MHz 1T1R/2T2R/2T4R/4T4R + 6×5/10/15/20 MHz 1T1R/2T2R/2T4R/4T4R |
| Number of Cells Specifications 6 |
3×5/10/15/20 MHz 1T1R/2T2R/2T4R/4T4R + 3×5/10/15/20 MHz 8T8R |
3×10/15/20 MHz 32T32R |
| Number of UEs in RRC Connected Mode |
2400 |
2400 |
| Throughput (Gbit/s) |
DL: 2.4
UL: 1.2 |
DL: 2.4
UL: 1.2 |
| Signalling Specifications (BHCA) |
432000 |
432000 |
| NR(TDD) |
| Number of Cells Specifications 1 |
– |
6×20/30/40/50/60/70/80/90/100 MHz 1T1R
6×20/30/40/50/60/70/80/90/100 MHz 2T2R
6×20/30/40/50/60/70/80/90/100 MHz 4T4R |
| Number of Cells Specifications 2 |
– |
3×20/30/40/50/60/70/80/90/100 MHz 8T8R |
| Number of Cells Specifications 3 |
– |
3×20/30/40/50/60/70/80/90/100 MHz 32T32R |
| Number of Cells Specifications 4 |
– |
3×20/30/40/50/60/70/80/90/100 MHz 64T64R |
| Number of Cells Specifications 5 |
– |
3×40/50/60/70/80/90/100 MHz 32T32R + 3×10/15/20 MHz 2R/4R |
| Number of Cells Specifications 6 |
– |
3×40/50/60/70/80/90/100 MHz 64T64R + 3×10/15/20 MHz 2R/4R |
| Number of Cells Specifications 7 |
– |
3×40/50/60/70/80/90/100 MHz 32T32R/64T64R + 3×10/15/20 MHz 2R/4R
(3): Mixed configuration of 32T32R and 64T64R cells with the same bandwidth A is supported. |
| Number of Cells Specifications 8 |
– |
3xA 32T32R/64T64R
(7): A indicates the cell bandwidth, which can be 20/30/40/50/60/70/80/90/100 MHz. 32T32R/64T64R indicates that mixed configuration of 32T32R and 64T64R cells with the same bandwidth A is supported. |
| Number of UEs in RRC Connected Mode |
– |
2400 |
| Throughput (DL:UL=4:1) (Gbit/s) |
– |
DL: 6
UL: 0.9 |
| Throughput (DL:UL=8:2) (Gbit/s) |
– |
DL: 6
UL: 0.9 |
| Signaling Specifications (BHCA) |
– |
432000 |
| LTE(NB-IoT) |
| Number of Cells Specifications 1 |
45 carriers (200 kHz, 4T4R) over 15 cells |
45 carriers (200 kHz, 4T4R) over 15 cells |
| Number of UEs in RRC Connected Mode |
4800 |
4800 |
| Number of Attached UEs |
2312000 |
2312000 |
| Throughput (Mbit/s) |
DL: 4.71
UL: 9 |
DL: 4.71
UL: 9 |
| Signalling Specifications (BHCA) |
1080000 |
1080000 |
| LTE(FDD) |
| Number of Cells Specifications 1 |
12×1.4/3/5/10/15/20 MHz 2T2R |
12×1.4/3/5/10/15/20 MHz 2T2R |
| Number of Cells Specifications 2 |
12×1.4/3/5/10/15/20 MHz 4T4R |
12×1.4/3/5/10/15/20 MHz 4T4R |
| Number of Cells Specifications 3 |
6×5/10/15/20 MHz 8T8R |
6×5/10/15/20 MHz 8T8R |
| Number of Cells Specifications 4 |
3×1.4/3/5/10/15/20 MHz 2T2R + 3×5/10/15/20 MHz 8T8R |
3×5/10/15/20 MHz 32T32R |
| Number of UEs in RRC Connected Mode |
1.4 MHz: 2016
3 MHz: 4320
5/10/15/20 MHz: 4800 |
1.4 MHz: 2016
3 MHz: 4320
5/10/15/20 MHz: 4800 |
| Number of UL Synchronized UEs |
1.4 MHz: 2016
3 MHz: 4320
5/10/15/20 MHz: 4800 |
1.4 MHz: 2016
3 MHz: 4320
5/10/15/20 MHz: 4800 |
| Number of DRBs |
14400 |
14400 |
| Throughput (Mbit/s) |
DL: 2400
UL: 1200 |
DL: 2400
UL: 1200 |
| Signaling Specifications (BHCA) |
720000 |
720000 |
| Number of VoLTE UEs (with ROHC) |
1800 |
1800 |
| Number of 2CC CA UEs |
1800 |
1800 |
| Number of 3CC CA UEs |
1200 |
1200 |
| Number of 4CC CA UEs |
900 |
900 |
| Number of 5CC CA UEs |
720 |
720 |
| LTE(TDD) |
| Number of Cells Specifications 1 |
12×5/10/15/20 MHz 2T2R |
12×5/10/15/20 MHz 2T2R |
| Number of Cells Specifications 2 |
12×5/10/15/20 MHz 4T4R |
12×5/10/15/20 MHz 4T4R |
| Number of Cells Specifications 3 |
6×10/15/20 MHz 8T8R |
12×10/15/20 MHz 8T8R (SA2)
6×10/15/20 MHz 8T8R (SA1) |
| Number of Cells Specifications 4 |
– |
6×5/10/15/20 MHz 4T4R + 3×10/15/20 MHz 32T32R/64T64R
4×5/10/15/20 MHz 4T4R + 4×10/15/20 MHz 32T32R/64T64R
(2): The Work Mode parameter must be set to HYBRID_BALANCE(Mixed configuration balancing) for the baseband processing unit.
(3): The Work Mode parameter must be set to HYBRID_MMCELL_ENHANCE(Mixed configuration enhanced MM) for the baseband processing unit. |
| Number of Cells Specifications 5 |
– |
6×10/15/20 MHz 8T8R + 3×10/15/20 MHz 32T32R/64T64R
4×10/15/20 MHz 8T8R + 4×10/15/20 MHz 32T32R/64T64R
(2): The Work Mode parameter must be set to HYBRID_BALANCE(Mixed configuration balancing) for the baseband processing unit.
(3): The Work Mode parameter must be set to HYBRID_MMCELL_ENHANCE(Mixed configuration enhanced MM) for the baseband processing unit. |
| Number of Cells Specifications 6 |
– |
6×10/15/20 MHz 32T32R/64T64R
(1): Mixed configuration of 32T32R and 64T64R cells with the same bandwidth is supported. |
| Number of UEs in RRC Connected Mode |
4800 |
4800 |
| Number of UL Synchronized UEs |
5 MHz: 3600
10/15/20 MHz: 4800 |
5 MHz: 3600
10/15/20 MHz: 4800 |
| Number of DRBs |
14400 |
14400 |
| Throughput (Mbit/s) |
DL: 2400
UL: 1200 |
DL: 2400 (4T4R/8T8R); 2700 (32T32R/64T64R)
UL: 1200 (4T4R/8T8R); 1400 (32T32R/64T64R) |
| Signaling Specifications (BHCA) |
720000 |
720000 |
| UMTS |
| Number of 2R Cells |
12 |
12 |
| Number of 4R Cells |
6 |
6 |
| Number of UL/DL CEs |
1024/1024 |
1024/1024 |
| Number of HSDPA Codes |
12×15 |
12×15 |
| Number of HSDPA/HSUPA UEs |
768/768 |
768/768 |
| LN(FDD) |
| LTE FDD Number of Cells Specifications 1 |
6×1.4/3/5/10/15/20 MHz 4T4R |
6×1.4/3/5/10/15/20 MHz 4T4R |
| NR FDD Number of Cells Specifications 1 |
6×5/10/15/20 MHz 4T4R |
6×5/10/15/20 MHz 4T4R |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 1 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 2400 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 2400 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 1 |
1200 |
1200 |
| LTE FDD Throughput (Mbit/s) Specifications 1 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| NR FDD Throughput (Mbit/s) Specifications 1 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| LTE FDD Signaling Specifications (BHCA) Specifications 1 |
360000 |
360000 |
| NR FDD Signaling Specifications (BHCA) Specifications 1 |
216000 |
216000 |
| LTE FDD Number of Cells Specifications 2 |
9×1.4/3/5/10/15/20 MHz 4T4R
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance) for the baseband processing unit. |
9×1.4/3/5/10/15/20 MHz 4T4R
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance) for the baseband processing unit. |
| NR FDD Number of Cells Specifications 2 |
3×5/10/15/20 MHz 4T4R |
3×5/10/15/20 MHz 4T4R |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 2 |
1.4 MHz: 1512
3 MHz: 3240
5/10/15/20 MHz: 3600 |
1.4 MHz: 1512
3 MHz: 3240
5/10/15/20 MHz: 3600 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 2 |
600 |
600 |
| LTE FDD Throughput (Mbit/s) Specifications 2 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| NR FDD Throughput (Mbit/s) Specifications 2 |
DL: 600
UL: 300 |
DL: 600
UL: 300 |
| LTE FDD Signaling Specifications (BHCA) Specifications 2 |
360000 |
360000 |
| NR FDD Signaling Specifications (BHCA) Specifications 2 |
108000 |
108000 |
| LTE FDD Number of Cells Specifications 3 |
3×1.4/3/5/10/15/20 MHz 4T4R |
3×1.4/3/5/10/15/20 MHz 4T4R |
| NR FDD Number of Cells Specifications 3 |
9×5/10/15/20 MHz 4T4R
(2): The Standard Ratio parameter must be set to NR_ENHANCE2(NR Enhance 2) for the baseband processing unit. |
9×5/10/15/20 MHz 4T4R
(2): The Standard Ratio parameter must be set to NR_ENHANCE2(NR Enhance 2) for the baseband processing unit. |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 3 |
1.4 MHz: 504
3 MHz: 1080
5/10/15/20 MHz: 1200 |
1.4 MHz: 504
3 MHz: 1080
5/10/15/20 MHz: 1200 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 3 |
1800 |
1800 |
| LTE FDD Throughput (Mbit/s) Specifications 3 |
DL: 600
UL: 225 |
DL: 600
UL: 225 |
| NR FDD Throughput (Mbit/s) Specifications 3 |
DL: 1800
UL: 900 |
DL: 1800
UL: 900 |
| LTE FDD Signaling Specifications (BHCA) Specifications 3 |
194000 |
194000 |
| NR FDD Signaling Specifications (BHCA) Specifications 3 |
324000 |
324000 |
| LTE FDD Number of Cells Specifications 4 |
6×1.4/3/5/10/15/20 MHz 4T4R |
6×1.4/3/5/10/15/20 MHz 4T4R |
| NR FDD Number of Cells Specifications 4 |
3×25/30/40 MHz 4T4R |
3×25/30/40 MHz 4T4R |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 4 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 2400 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 2400 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 4 |
1200 |
1200 |
| LTE FDD Throughput (Mbit/s) Specifications 4 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| NR FDD Throughput (Mbit/s) Specifications 4 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| LTE FDD Signaling Specifications (BHCA) Specifications 4 |
360000 |
360000 |
| NR FDD Signaling Specifications (BHCA) Specifications 4 |
216000 |
216000 |
| LTE FDD Number of Cells Specifications 5 |
3×1.4/3/5/10/15/20 MHz 8T8R |
3×1.4/3/5/10/15/20 MHz 8T8R |
| NR FDD Number of Cells Specifications 5 |
3×5/10/15/20 MHz 8T8R |
3×5/10/15/20 MHz 8T8R |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 5 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 2400 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 2400 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 5 |
1200 |
1200 |
| LTE FDD Throughput (Mbit/s) Specifications 5 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| NR FDD Throughput (Mbit/s) Specifications 5 |
DL: 800
UL: 300 |
DL: 800
UL: 300 |
| LTE FDD Signaling Specifications (BHCA) Specifications 5 |
360000 |
360000 |
| NR FDD Signaling Specifications (BHCA) Specifications 5 |
216000 |
216000 |
| LTE FDD Number of Cells Specifications 6 |
3×1.4/3/5/10/15/20 MHz 4T4R |
3×1.4/3/5/10/15/20 MHz 4T4R |
| NR FDD Number of Cells Specifications 6 |
3×25/30/40 MHz 4T4R +3×5/10/15/20 MHz 4T4R
(2): The Standard Ratio parameter must be set to NR_ENHANCE2(NR Enhance 2) for the baseband processing unit. |
3×25/30/40 MHz 4T4R +3×5/10/15/20 MHz 4T4R
(2): The Standard Ratio parameter must be set to NR_ENHANCE2(NR Enhance 2) for the baseband processing unit. |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 6 |
1.4 MHz: 504
3 MHz: 1080
5/10/15/20 MHz: 1200 |
1.4 MHz: 504
3 MHz: 1080
5/10/15/20 MHz: 1200 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 6 |
1200 |
1200 |
| LTE FDD Throughput (Mbit/s) Specifications 6 |
DL: 600
UL: 225 |
DL: 600
UL: 225 |
| NR FDD Throughput (Mbit/s) Specifications 6 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| LTE FDD Signalling Specifications (BHCA) Specifications 6 |
194000 |
194000 |
| NR FDD Signalling Specifications (BHCA) Specifications 6 |
216000 |
216000 |
| TN(FDD) |
| LTE TDD Number of Cells Specifications 1 |
– |
6×5/10/15/20 MHz 8T8R (SA2) |
| NR FDD Number of Cells Specifications 1 |
– |
Sub-6 GHz: 6×5/10/15/20 MHz 4T4R |
| LTE TDD Number of UEs in RRC Connected Mode Specifications 1 |
– |
2400 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 1 |
– |
1200 |
| LTE TDD Throughput (Mbit/s) Specifications 1 |
– |
DL: 900
UL: 120 |
| NR FDD Throughput (Mbit/s) Specifications 1 |
– |
DL: 1200
UL: 600 |
| LTE TDD Signaling Specifications (BHCA) Specifications 1 |
– |
360000 |
| NR FDD Signaling Specifications (BHCA) Specifications 1 |
– |
216000 |
| LTE TDD Number of Cells Specifications 2 |
– |
3×5/10/15/20 MHz 32T32R/64T64R (SA2) |
| NR FDD Number of Cells Specifications 2 |
– |
Sub-6 GHz: 6×5/10/15/20 MHz 4T4R |
| LTE TDD Number of UEs in RRC Connected Mode Specifications 2 |
– |
2400 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 2 |
– |
1200 |
| LTE TDD Throughput (Mbit/s) Specifications 2 |
– |
DL: 1136
UL: 170 |
| NR FDD Throughput (Mbit/s) Specifications 2 |
– |
DL: 1200
UL: 600 |
| LTE TDD Signaling Specifications (BHCA) Specifications 2 |
– |
360000 |
| NR FDD Signaling Specifications (BHCA) Specifications 2 |
– |
216000 |
| TN(TDD) |
| LTE TDD Number of Cells Specifications 1 |
– |
6×5/10/15/20 MHz 4T4R (SA2) |
| NR TDD Number of Cells Specifications 1 |
– |
Sub-6 GHz: 3×20/30/40/50/60/70/80/90/100 MHz 4T4R |
| LTE TDD Number of UEs in RRC Connected Mode Specifications 1 |
– |
2400 |
| NR TDD Number of UEs in RRC Connected Mode Specifications 1 |
– |
1200 |
| LTE TDD Throughput (Mbit/s) Specifications 1 |
– |
DL: 900
UL: 120 |
| NR TDD Throughput (Mbit/s) Specifications 1 |
– |
DL: 2250
UL: 340 |
| LTE TDD Signaling Specifications (BHCA) Specifications 1 |
– |
360000 |
| NR TDD Signaling Specifications (BHCA) Specifications 1 |
– |
216000 |
| LTE TDD Number of Cells Specifications 2 |
– |
6×5/10/15/20 MHz 8T8R (SA2) |
| NR TDD Number of Cells Specifications 2 |
– |
Sub-6 GHz:
3×20/30/40/60 MHz 8T8R |
| LTE TDD Number of UEs in RRC Connected Mode Specifications 2 |
– |
2400 |
| NR TDD Number of UEs in RRC Connected Mode Specifications 2 |
– |
1200 |
| LTE TDD Throughput (Mbit/s) Specifications 2 |
– |
DL: 900
UL: 120 |
| NR TDD Throughput (Mbit/s) Specifications 2 |
– |
DL: 1740
UL: 280 |
| LTE TDD Signaling Specifications (BHCA) Specifications 2 |
– |
360000 |
| NR TDD Signaling Specifications (BHCA) Specifications 2 |
– |
216000 |
| LTE TDD Number of Cells Specifications 3 |
– |
3×5/10/15/20 MHz 8T8R (SA2) |
| NR TDD Number of Cells Specifications 3 |
– |
Sub-6 GHz:
3×20/30/40/50/60/80 MHz 8T8R
(2): The Standard Ratio parameter must be set to NR_ENHANCE2(NR Enhance 2) for the baseband processing unit. |
| LTE TDD Number of UEs in RRC Connected Mode Specifications 3 |
– |
1200 |
| NR TDD Number of UEs in RRC Connected Mode Specifications 3 |
– |
1200 |
| LTE TDD Throughput (Mbit/s) Specifications 3 |
– |
DL: 450
UL: 60 |
| NR TDD Throughput (Mbit/s) Specifications 3 |
– |
DL: 2350
UL: 370 |
| LTE TDD Signaling Specifications (BHCA) Specifications 3 |
– |
216000 |
| NR TDD Signaling Specifications (BHCA) Specifications 3 |
– |
216000 |
| LN(TDD) |
| LTE FDD Number of Cells Specifications 1 |
– |
6×1.4/3/5/10/15/20 MHz 4T4R |
| NR TDD Number of Cells Specifications 1 |
– |
Sub-6 GHz: 3×20/30/40/50/60/70/80/90/100 MHz 4T4R |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 1 |
– |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 3600 |
| NR TDD Number of UEs in RRC Connected Mode Specifications 1 |
– |
1200 |
| LTE FDD Throughput (Mbit/s) Specifications 1 |
– |
DL: 1200
UL: 600 |
| NR TDD Throughput (Mbit/s) Specifications 1 |
– |
DL: 2250
UL: 340 |
| LTE FDD Signaling Specifications (BHCA) Specifications 1 |
– |
360000 |
| NR TDD Signaling Specifications (BHCA) Specifications 1 |
– |
216000 |
| LM |
| Number of LTE FDD Cells + Number of LTE NB-IoT Cells Specifications 1 |
12×1.4/3/5/10/15/20 MHz 4T4R + 9 carriers (200 kHz, 4T4R) over 3 cells |
12×1.4/3/5/10/15/20 MHz 4T4R + 9 carriers (200 kHz, 4T4R) over 3 cells |
| Number of LTE FDD Cells + Number of LTE NB-IoT Cells Specifications 2 |
9×1.4/3/5/10/15/20 MHz 4T4R + 18 carriers (200 kHz, 4T4R) over 6 cells
(1): The Standard Ratio parameter must be set to NBIOT_ENHANCE(NBIOT Enhance) for the baseband processing unit. |
9×1.4/3/5/10/15/20 MHz 4T4R + 18 carriers (200 kHz, 4T4R) over 6 cells
(1): The Standard Ratio parameter must be set to NBIOT_ENHANCE(NBIOT Enhance) for the baseband processing unit. |
| LTE NB-IoT Number of UEs in RRC Connected Mode |
4800 |
4800 |
| Number of UEs in RRC Connected Mode for LTE FDD + Number of Attached UEs for LTE NB-IoT |
3350+693000 |
3350+693000 |
| Throughput (Mbit/s) |
DL: 2400
UL: 1200 |
DL: 2400
UL: 1200 |
| LTE FDD Signaling Specifications + LTE NB-IoT Signaling Specifications (BHCA) |
504000+324000 |
504000+324000 |
| TM |
| Number of LTE TDD Cells + Number of LTE NB-IoT Cells Specifications 1 |
12×5/10/15/20 MHz 4T4R + 9 carriers (200 kHz, 4T4R) over 6 cells |
12×5/10/15/20 MHz 4T4R + 9 carriers (200 kHz, 4T4R) over 6 cells |
| Number of LTE TDD Cells + Number of LTE NB-IoT Cells Specifications 2 |
9×5/10/15/20 MHz 4T4R + 18 carriers (200 kHz, 4T4R) over 9 cells
(1): The Standard Ratio parameter must be set to NBIOT_ENHANCE(NBIOT Enhance) for the baseband processing unit. |
9×5/10/15/20 MHz 4T4R + 18 carriers (200 kHz, 4T4R) over 9 cells
(1): The Standard Ratio parameter must be set to NBIOT_ENHANCE(NBIOT Enhance) for the baseband processing unit. |
| LTE NB-IoT Number of UEs in RRC Connected Mode |
4800 |
4800 |
| Number of UEs in RRC Connected Mode for LTE TDD + Number of Attached UEs for LTE NB-IoT |
3350+693000 |
3350+693000 |
| Throughput (Mbit/s) |
DL: 2400
UL: 1200 |
DL: 2400 (4T4R/8T8R); 2700 (32T32R/64T64R)
UL: 1200 (4T4R/8T8R); 1400 (32T32R/64T64R) |
| LTE TDD Signaling Specifications + LTE NB-IoT Signaling Specifications (BHCA) |
504000+324000 |
504000+324000 |
| LT |
| Number of LTE FDD Cells + Number of LTE TDD Cells Specifications 1 |
6×1.4/3/5/10/15/20 MHz 4T4R + 6×5/10/15/20 MHz 4T4R |
6×1.4/3/5/10/15/20 MHz 4T4R + 6×5/10/15/20 MHz 4T4R |
| Number of LTE FDD Cells + Number of LTE TDD Cells Specifications 2 |
9×1.4/3/5/10/15/20 MHz 4T4R + 3×5/10/15/20 MHz 4T4R
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance). |
9×1.4/3/5/10/15/20 MHz 4T4R + 3×5/10/15/20 MHz 4T4R
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance). |
| Number of LTE FDD Cells + Number of LTE TDD Cells Specifications 3 |
3×1.4/3/5/10/15/20 MHz 4T4R + 9×5/10/15/20 MHz 4T4R
(2): The Standard Ratio parameter must be set to TDD_ENHANCE(TDD Enhance). |
3×1.4/3/5/10/15/20 MHz 4T4R + 9×5/10/15/20 MHz 4T4R
(2): The Standard Ratio parameter must be set to TDD_ENHANCE(TDD Enhance). |
| Number of LTE FDD Cells + Number of LTE TDD Cells Specifications 4 |
6×1.4/3/5/10/15/20 MHz 4T4R + 3×10/15/20 MHz 8T8R |
6×1.4/3/5/10/15/20 MHz 4T4R + 6×10/15/20 MHz 8T8R (SA2) |
| Number of LTE FDD Cells + Number of LTE TDD Cells Specifications 5 |
– |
6×1.4/3/5/10/15/20 MHz 4T4R + 3×10/15/20 MHz 8T8R (SA1) |
| Number of LTE FDD Cells + Number of LTE TDD Cells Specifications 6 |
– |
9×1.4/3/5/10/15/20 MHz 4T4R + 3×10/15/20 MHz 8T8R (SA2)
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance). |
| Number of LTE FDD Cells + Number of LTE TDD Cells Specifications 7 |
– |
3×1.4/3/5/10/15/20 MHz 4T4R + 9×10/15/20 MHz 8T8R (SA2)
(2): The Standard Ratio parameter must be set to TDD_ENHANCE(TDD Enhance). |
| Number of LTE FDD Cells + Number of LTE TDD Cells Specifications 8 |
– |
6×1.4/3/5/10/15/20 MHz 4T4R + 3×10/15/20 MHz 32T32R/64T64R
(3): The Work Mode parameter must be set to HYBRID_BALANCE(Mixed configuration balancing). Only SA2 is supported for LTE TDD. |
| Number of UEs in RRC Connected Mode |
4800 |
4800 |
| UM |
| LTE NB-IoT Number of Cells |
18 carriers (200 kHz, 4T4R) over 6 cells |
18 carriers (200 kHz, 4T4R) over 6 cells |
| UMTS Number of 2R Cells |
6 |
6 |
| UMTS Number of 4R Cells |
6 |
6 |
| UMTS HSDPA/HSUPA UEs |
384/384 |
384/384 |
| LTE NB-IoT Number of Attached UEs |
1156000 |
1156000 |
| LTE NB-IoT Number of UEs in RRC Connected Mode |
3600 |
3600 |
| UMTS Number of UL/DL CEs |
512/768 |
512/768 |
| LTE NB-IoT Throughput (Mbit/s) |
DL: 1.884
UL: 3.6 |
DL: 1.884
UL: 3.6 |
| LTE NB-IoT Signaling Specifications (BHCA) |
540000 |
540000 |
| UL |
| LTE FDD Number of Cells Specifications 1 |
6×1.4/3/5/10/15/20 MHz 4T4R
3×5/10/15/20 MHz 8T8R |
6×1.4/3/5/10/15/20 MHz 4T4R
3×5/10/15/20 MHz 8T8R |
| UMTS Number of 2R Cells Specifications 1 |
6 |
6 |
| UMTS Number of 4R Cells Specifications 1 |
6 |
6 |
| UMTS Number of UL/DL CEs Specifications 1 |
512/768 |
512/768 |
| LTE FDD Throughput (Mbit/s) Specifications 1 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| UMTS HSDPA Codes Specifications 1 |
6×15 |
6×15 |
| LTE FDD Signaling Specifications (BHCA) Specifications 1 |
360000 |
360000 |
| UMTS HSDPA/HSUPA UEs Specifications 1 |
384/384 |
384/384 |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 1 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 3600 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 3600 |
| LTE FDD Number of Cells Specifications 2 |
9×1.4/3/5/10/15/20 MHz 4T4R
3×5/10/15/20 MHz 8T8R
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance). |
9×1.4/3/5/10/15/20 MHz 4T4R
3×5/10/15/20 MHz 8T8R
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance). |
| UMTS Number of 2R Cells Specifications 2 |
3 |
3 |
| UMTS Number of 4R Cells Specifications 2 |
3 |
3 |
| UMTS Number of UL/DL CEs Specifications 2 |
256/384 |
256/384 |
| LTE FDD Throughput (Mbit/s) Specifications 2 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| UMTS HSDPA Codes Specifications 2 |
3×15 |
3×15 |
| LTE FDD Signaling Specifications (BHCA) Specifications 2 |
360000 |
360000 |
| UMTS HSDPA/HSUPA UEs Specifications 2 |
192/192 |
192/192 |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 2 |
1.4 MHz: 1512
3 MHz: 3240
5/10/15/20 MHz: 3600 |
1.4 MHz: 1512
3 MHz: 3240
5/10/15/20 MHz: 3600 |
| LMN(FDD) |
| LTE FDD Number of Cells Specifications 1 |
6×1.4/3/5/10/15/20 MHz 4T4R |
6×1.4/3/5/10/15/20 MHz 4T4R |
| LTE NB-IoT Number of Cells Specifications 1 |
6 carriers (200 kHz, 4T4R) over 6 cells |
6 carriers (200 kHz, 4T4R) over 6 cells |
| NR FDD Number of Cells Specifications 1 |
6×5/10/15/20 MHz 4T4R |
6×5/10/15/20 MHz 4T4R |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 1 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 1680 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 1680 |
| LTE NB-IoT Number of UEs in RRC Connected Mode Specifications 1 |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
| LTE NB-IoT Number of Attached UEs Specifications 1 |
347000 |
347000 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 1 |
1200 |
1200 |
| LTE FDD Throughput (Mbit/s) Specifications 1 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| LTE NB-IoT Throughput (Mbit/s) Specifications 1 |
DL: 0.666
UL: 1.2 |
DL: 0.666
UL: 1.2 |
| NR FDD Throughput (Mbit/s) Specifications 1 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| LTE FDD Signaling Specifications (BHCA) Specifications 1 |
252000 |
252000 |
| LTE NB-IoT Signaling Specifications (BHCA) Specifications 1 |
162000 |
162000 |
| NR FDD Signaling Specifications (BHCA) Specifications 1 |
216000 |
216000 |
| LTE FDD Number of Cells Specifications 2 |
9×1.4/3/5/10/15/20 MHz 4T4R
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance). |
9×1.4/3/5/10/15/20 MHz 4T4R
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance). |
| LTE NB-IoT Number of Cells Specifications 2 |
6 carriers (200 kHz, 4T4R) over 6 cells |
6 carriers (200 kHz, 4T4R) over 6 cells |
| NR FDD Number of Cells Specifications 2 |
3×5/10/15/20 MHz 4T4R |
3×5/10/15/20 MHz 4T4R |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 2 |
1.4 MHz: 1512
3/5/10/15/20 MHz: 2520 |
1.4 MHz: 1512
3/5/10/15/20 MHz: 2520 |
| LTE NB-IoT Number of UEs in RRC Connected Mode Specifications 2 |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
| LTE NB-IoT Number of Attached UEs Specifications 2 |
347000 |
347000 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 2 |
600 |
600 |
| LTE FDD Throughput (Mbit/s) Specifications 2 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| LTE NB-IoT Throughput (Mbit/s) Specifications 2 |
DL: 0.666
UL: 1.2 |
DL: 0.666
UL: 1.2 |
| NR FDD Throughput (Mbit/s) Specifications 2 |
DL: 600
UL: 300 |
DL: 600
UL: 300 |
| LTE FDD Signaling Specifications (BHCA) Specifications 2 |
252000 |
252000 |
| LTE NB-IoT Signaling Specifications (BHCA) Specifications 2 |
162000 |
162000 |
| NR FDD Signaling Specifications (BHCA) Specifications 2 |
108000 |
108000 |
| LTE FDD Number of Cells Specifications 3 |
6×1.4/3/5/10/15/20 MHz 4T4R |
6×1.4/3/5/10/15/20 MHz 4T4R |
| LTE NB-IoT Number of Cells Specifications 3 |
6 carriers (200 kHz, 4T4R) over 6 cells |
6 carriers (200 kHz, 4T4R) over 6 cells |
| NR FDD Number of Cells Specifications 3 |
3×25/30/40 MHz 4T4R |
3×25/30/40 MHz 4T4R |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 3 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 1680 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 1680 |
| LTE NB-IoT Number of UEs in RRC Connected Mode Specifications 3 |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
| LTE NB-IoT Number of Attached UEs Specifications 3 |
347000 |
347000 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 3 |
1200 |
1200 |
| LTE FDD Throughput (Mbit/s) Specifications 3 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| LTE NB-IoT Throughput (Mbit/s) Specifications 3 |
DL: 0.666
UL: 1.2 |
DL: 0.666
UL: 1.2 |
| NR FDD Throughput (Mbit/s) Specifications 3 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| LTE FDD Signaling Specifications (BHCA) Specifications 3 |
360000 |
360000 |
| LTE NB-IoT Signaling Specifications (BHCA) Specifications 3 |
162000 |
162000 |
| NR FDD Signaling Specifications (BHCA) Specifications 3 |
216000 |
216000 |
| LTE FDD Number of Cells Specifications 4 |
3×1.4/3/5/10/15/20 MHz 4T4R |
3×1.4/3/5/10/15/20 MHz 4T4R |
| LTE NB-IoT Number of Cells Specifications 4 |
3 carriers (200 kHz, 4T4R) over 3 cells |
3 carriers (200 kHz, 4T4R) over 3 cells |
| NR FDD Number of Cells Specifications 4 |
9×5/10/15/20 MHz 4T4R
(2): The Standard Ratio parameter must be set to NR_ENHANCE2(NR Enhance 2). |
9×5/10/15/20 MHz 4T4R
(2): The Standard Ratio parameter must be set to NR_ENHANCE2(NR Enhance 2). |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 4 |
1.4 MHz: 504
3 MHz: 1080
5/10/15/20 MHz: 1200 |
1.4 MHz: 504
3 MHz: 1080
5/10/15/20 MHz: 1200 |
| LTE NB-IoT Number of UEs in RRC Connected Mode Specifications 4 |
600, which can be shared with LTE FDD; ≤ 1200 in total |
600, which can be shared with LTE FDD; ≤ 1200 in total |
| LTE NB-IoT Number of Attached UEs Specifications 4 |
190000 |
190000 |
| NR FDD Number of UEs in RRC Connected Mode Specifications 4 |
1800 |
1800 |
| LTE FDD Throughput (Mbit/s) Specifications 4 |
DL: 600
UL: 225 |
DL: 600
UL: 225 |
| LTE NB-IoT Throughput (Mbit/s) Specifications 4 |
DL: 0.318
UL: 0.6 |
DL: 0.318
UL: 0.6 |
| NR FDD Throughput (Mbit/s) Specifications 4 |
DL: 1800
UL: 900 |
DL: 1800
UL: 900 |
| LTE FDD Signaling Specifications (BHCA) Specifications 4 |
194000 |
194000 |
| LTE NB-IoT Signaling Specifications (BHCA) Specifications 4 |
89000 |
89000 |
| NR FDD Signaling Specifications (BHCA) Specifications 4 |
324000 |
324000 |
| LMN(TDD) |
| LTE FDD Number of Cells Specifications 1 |
– |
6×1.4/3/5/10/15/20 MHz 4T4R |
| LTE NB-IoT Number of Cells Specifications 1 |
– |
6 carriers (200 kHz, 4T4R) over 6 cells |
| NR TDD Number of Cells Specifications 1 |
– |
Sub-6 GHz: 3×20/30/40/50/60/70/80/90/100 MHz 4T4R |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 1 |
– |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 2520 |
| LTE NB-IoT Number of UEs in RRC Connected Mode Specifications 1 |
– |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
| LTE NB-IoT Number of Attached UEs Specifications 1 |
– |
347000 |
| NR TDD Number of UEs in RRC Connected Mode Specifications 1 |
– |
1200 |
| LTE FDD Throughput (Mbit/s) Specifications 1 |
– |
DL: 1200
UL: 600 |
| LTE NB-IoT Throughput (Mbit/s) Specifications 1 |
– |
DL: 0.666
UL: 1.2 |
| NR TDD Throughput (Mbit/s) Specifications 1 |
– |
DL: 2250
UL: 340 |
| LTE FDD Signaling Specifications (BHCA) Specifications 1 |
– |
252000 |
| LTE NB-IoT Signaling Specifications (BHCA) Specifications 1 |
– |
162000 |
| NR TDD Signaling Specifications (BHCA) Specifications 1 |
– |
216000 |
| LTM |
| Number of LTE FDD Cells + Number of LTE TDD Cells + Number of LTE NB-IoT Cells Specifications 1 |
6×1.4/3/5/10/15/20 MHz 4T4R + 6×5/10/15/20 MHz 4T4R + 9 carriers (200 kHz, 4T4R) over 6 cells |
6×1.4/3/5/10/15/20 MHz 4T4R + 6×5/10/15/20 MHz 4T4R + 9 carriers (200 kHz, 4T4R) over 6 cells |
| Number of LTE FDD Cells + Number of LTE TDD Cells + Number of LTE NB-IoT Cells Specifications 2 |
9×1.4/3/5/10/15/20 MHz 4T4R + 3×5/10/15/20 MHz 4T4R + 9 carriers (200 kHz, 4T4R) over 6 cells
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance) for the baseband processing unit. |
9×1.4/3/5/10/15/20 MHz 4T4R + 3×5/10/15/20 MHz 4T4R + 9 carriers (200 kHz, 4T4R) over 6 cells
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance) for the baseband processing unit. |
| Number of LTE FDD Cells + Number of LTE TDD Cells + Number of LTE NB-IoT Cells Specifications 3 |
3×1.4/3/5/10/15/20 MHz 4T4R + 9×5/10/15/20 MHz 4T4R + 9 carriers (200 kHz, 4T4R) over 6 cells
(2): The Standard Ratio parameter must be set to TDD_ENHANCE(TDD Enhance) for the baseband processing unit. |
3×1.4/3/5/10/15/20 MHz 4T4R + 9×5/10/15/20 MHz 4T4R + 9 carriers (200 kHz, 4T4R) over 6 cells
(2): The Standard Ratio parameter must be set to TDD_ENHANCE(TDD Enhance) for the baseband processing unit. |
| Number of LTE FDD Cells + Number of LTE TDD Cells + Number of LTE NB-IoT Cells Specifications 4 |
6×1.4/3/5/10/15/20 MHz 4T4R + 3×10/15/20 MHz 8T8R + 9 carriers (200 kHz, 4T4R) over 6 cells |
6×1.4/3/5/10/15/20 MHz 4T4R + 6×10/15/20 MHz 8T8R (SA2) + 9 carriers (200 kHz, 4T4R) over 6 cells |
| Number of LTE FDD Cells + Number of LTE TDD Cells + Number of LTE NB-IoT Cells Specifications 5 |
– |
9×1.4/3/5/10/15/20 MHz 4T4R + 3×10/15/20 MHz 8T8R (SA2) + 9 carriers (200 kHz, 4T4R) over 6 cells
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance) for the baseband processing unit. |
| Number of LTE FDD Cells + Number of LTE TDD Cells + Number of LTE NB-IoT Cells Specifications 6 |
– |
3×1.4/3/5/10/15/20 MHz 4T4R + 9×10/15/20 MHz 8T8R (SA2) + 9 carriers (200 kHz, 4T4R) over 6 cells
(2): The Standard Ratio parameter must be set to TDD_ENHANCE(TDD Enhance) for the baseband processing unit. |
| Number of LTE FDD Cells + Number of LTE TDD Cells + Number of LTE NB-IoT Cells Specifications 7 |
– |
6×1.4/3/5/10/15/20 MHz 4T4R + 3×10/15/20 MHz 8T8R (SA1) + 9 carriers (200 kHz, 4T4R) over 6 cells |
| Number of LTE FDD Cells + Number of LTE TDD Cells + Number of LTE NB-IoT Cells Specifications 8 |
– |
6×1.4/3/5/10/15/20 MHz 4T4R + 3×10/15/20 MHz 32T32R/64T64R + 9 carriers (200 kHz, 4T4R) over 6 cells
(3): The Work Mode parameter must be set to HYBRID_BALANCE(Mixed configuration balancing) for the baseband processing unit. |
| LTE NB-IoT Number of UEs in RRC Connected Mode |
4800 |
4800 |
| Number of UEs in RRC Connected Mode for LTE FDD+TDD + Number of Attached UEs for LTE NB-IoT |
3350+693000 |
3350+693000 |
| ULM |
| LTE FDD Number of Cells Specifications 1 |
6×1.4/3/5/10/15/20 MHz 4T4R |
6×1.4/3/5/10/15/20 MHz 4T4R |
| UMTS Number of 2R Cells Specifications 1 |
6 |
6 |
| UMTS Number of 4R Cells Specifications 1 |
6 |
6 |
| LTE NB-IoT Number of Cells Specifications 1 |
6 carriers (200 kHz, 4T4R) over 6 cells |
6 carriers (200 kHz, 4T4R) over 6 cells |
| UMTS HSDPA/HSUPA UEs Specifications 1 |
384/384 |
384/384 |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 1 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 2520 |
1.4 MHz: 1008
3 MHz: 2160
5/10/15/20 MHz: 2520 |
| LTE NB-IoT Number of Attached UEs Specifications 1 |
347000 |
347000 |
| LTE NB-IoT Number of UEs in RRC Connected Mode Specifications 1 |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
| UMTS Number of UL/DL CEs Specifications 1 |
512/768 |
512/768 |
| LTE FDD Throughput (Mbit/s) Specifications 1 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| LTE NB-IoT Throughput (Mbit/s) Specifications 1 |
DL: 0.666
UL: 1.2 |
DL: 0.666
UL: 1.2 |
| UMTS HSDPA Codes Specifications 1 |
6×15 |
6×15 |
| LTE FDD Signaling Specifications (BHCA) Specifications 1 |
252000 |
252000 |
| LTE NB-IoT Signaling Specifications (BHCA) Specifications 1 |
162000 |
162000 |
| LTE FDD Number of Cells Specifications 2 |
9×1.4/3/5/10/15/20 MHz 4T4R
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance). |
9×1.4/3/5/10/15/20 MHz 4T4R
(1): The Standard Ratio parameter must be set to FDD_ENHANCE(FDD Enhance). |
| UMTS Number of 2R Cells Specifications 2 |
3 |
3 |
| UMTS Number of 4R Cells Specifications 2 |
3 |
3 |
| LTE NB-IoT Number of Cells Specifications 2 |
6 carriers (200 kHz, 4T4R) over 6 cells |
6 carriers (200 kHz, 4T4R) over 6 cells |
| UMTS HSDPA/HSUPA UEs Specifications 2 |
192/192 |
192/192 |
| LTE FDD Number of UEs in RRC Connected Mode Specifications 2 |
1.4 MHz: 1512
3/5/10/15/20 MHz: 2520 |
1.4 MHz: 1512
3/5/10/15/20 MHz: 2520 |
| LTE NB-IoT Number of Attached UEs Specifications 2 |
347000 |
347000 |
| LTE NB-IoT Number of UEs in RRC Connected Mode Specifications 2 |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
1800, which can be shared with LTE FDD; ≤ 3600 in total |
| UMTS Number of UL/DL CEs Specifications 2 |
256/384 |
256/384 |
| LTE FDD Throughput (Mbit/s) Specifications 2 |
DL: 1200
UL: 600 |
DL: 1200
UL: 600 |
| LTE NB-IoT Throughput (Mbit/s) Specifications 2 |
DL: 0.666
UL: 1.2 |
DL: 0.666
UL: 1.2 |
| UMTS HSDPA Codes Specifications 2 |
3×15 |
3×15 |
| LTE FDD Signaling Specifications (BHCA) Specifications 2 |
252000 |
252000 |
| LTE NB-IoT Signaling Specifications (BHCA) Specifications 2 |
162000 |
162000 |
| Application Version |
| Start Base Station Version That Supports Board Software Mapping |
V100R015C10SPC100 |
V100R015C10SPC100 |
| Last Base Station Version That Supports Board Software Mapping |
To be determined |
To be determined |
| Spare Parts |
